Product ID:EP-P CARTRIDGE FOR LASER BEAM PRINTER, R74-2004
MSDS Date:06/01/1993
FSC:6850
NIIN:00N053157
MSDS Number: BVQPG

CANON

ONE CANON PLAZA
LAKE SUCCESS, NY 11042
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 516-328-5600

Preparer: JOSEPH PALMERI

Cage: 08YZ7

CANON USA INC

NEW HYDE PARK, NY 11042 US

Telephone: 516-328-5000; 5600

Cage: 08YZ7

STYRENE ACRYLATE COPOLYMER

Fraction By Weight: 45-55%

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 45-55%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE, UNLESS
CARTRIDGE IS BROKEN OR FORCED. ACUTE:MINIMAL RESP TRACT IRRIT MAY
OCCUR AS W/EXPOSURE TO LG AMTS ANY NON-TOXIC DUST. INHAL:TONER IS A
FINELY DIVIDED SOLID. DO NO T BREATHE DUST. EYE:ANY MATL THAT
CONTACTS EYE MAY BE IRRITATING. SKIN:LOW HAZARD FOR INDUSTRIAL
HANDLING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE & FLUSH
W/PLENTY OF WATER FOR @ LEAST 15 MINUTES. IF IRRIT PERSISTS GET MED
ATTN. SKIN:WASH WITH SOAP & WATER. INGEST:DRINK SEVERAL GLASSES OF
WAT ER. CALL A PHYSICIAN.

Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . NON FLAM SOLID ACCDG TO TEST METHOD 16 CFR
1500.44.
Unusual Fire/Explosion Hazard:THIS MATL, LIKE MOST ORGANIC MATLS IN
POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER
CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.5-1.8 (WATER=1). EVAP RATE:NEGLIGIBLE (BUTYL ACETATE = 1).

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:SUPDAT
Evaporation Rate & Reference:SUPP DATA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER, SLIGHT PLASTIC ODOR
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS W/ANY OTHER ORG MATL, DECOMP WILL
PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE.

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS. TONER MAY
BE CONSIDERED PLASTIC WASTE. CARTRIDGE IS CONSTRUCTED OF PLASTICS &
METALS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.